|
|
The Model 7290 provides unrivaled versatility and functionality while maintaining a high degree of safety. The Model 7290 produces an explosive report and a brilliant flash. Energy is released radially and equally through top and base ports at an angle of 15° off the vertical axis. The balanced output ensures that the device does not become a dangerous projectile. It remains intact and is disposable after use. The base contains a standard 3/8-16 UNC thread at its center allowing attachment of numerous accessories. Clamp, Stake and Magnet: For trip wiring, perimeter protection, remote initiation, etc. Eye Bolt: For attaching lanyards to retrieve after use and other tactical applications. Available attachments make this device adaptable to many situations. Accessories can be tailored to suit user-specific requirements. Built and tested to Military Ammunition Standards.
View more information
Danger
• Low fire potential.
• For use only by qualified personnel trained in the use of these products.
Safety
Our 7290 Flash-Bang products come standard with our pull ring safety clip, which retains the pull ring against the fuze body. Releasing the pull ring requires a clockwise twist before pulling the pin. The pull ring can easily be reinserted to the safe position if the pin has not been removed.
Output
175 db @ 5 Feet, 6-8 million candela, 8.5 milliseconds 50% of energy through top 10 ports at 15° from vertical, 50% of energy through 10 base ports at 15° from vertical
Physical
Model ....................... 7290
Overall Height ........... 6"
Total Weight ............. 550 gm (19.4oz)
Flash Ports ............... 10 top & 10 base
Min Qty 24
|
|
|
|
The new Model 7200 training system provides an excellent training device. It is built and weighs exactly the same as our Model 7290 Flash-Bang, but has no flash charge. The 7290T body is painted with a bright blue coating, and it can be used an unlimited number of times. The M201FB fuze for this system has 10 times the output of a normal M201 fuze and it is threaded with a left hand thread so it can not be accidentally used in any other munitions. The Model 7200 produces an output of about 120db. The base contains a standard 3/8-16 UNC thread at its center allowing attachment of numerous accessories, including: Clamp, Stake, Eye Bolt or Magnet.
View more information
Danger
• For use only by qualified personnel trained in the use of these products.
Safety
Our 7200 Flash-Bang products come standard with our pull ring safety clip, which retains the pull ring against the fuze body. Releasing the pull ring requires a clockwise twist before pulling the pin. The pull ring can easily be reinserted to the safe position if the pin has not been removed.
Output
120 db @ 5 Feet
Physical
Model ....................... 7200
Overall Height ........... 6"
Total Weight ............. 550 gm (19.4oz)
Flash Ports ............... 10 top & 10 base
|
|
|
|
The CTS 7290M Mini Flash-Bang is the newest generation in the evolution of the Flash-Bang. Our Model 7290M Flash-Bang exhibits all of the same attributes of it's larger counterpart but in a smaller and lighter package. Weighing in at just 15 ounces the new 7290M is approximately 30% lighter than the 7290 but still has the same 175db output of the 7290 and produces 4-5 million candela of light. At 1.5 inches in diameter the Mini-Bang fits into 37 and 40mm shell loops as well as some double magazine pouches.
The patented design of the 7290M, incorporates a porting system that eliminates movement of the body at detonation even if the top or bottom of the device should be in contact with a hard surface. In addition, internal adjustments have greatly reduced smoke output.
The 7290M is non-reloadable, eliminating the need to count the number of times a flash bang body is reloaded and eliminating the need of cleaning and maintaining a reloadable body. Best of all the cost of the nonreloadable CTS flash bangs is about the same as the cost of just the reloads of other manufacturers.
View more information
Danger
• Low fire potential
• For use only by qualified personnel trained in the use of these products.
Safety
Our 7290M Mini Flash-Bang products come standard with our pull ring safety clip, which retains the pull ring against the fuze body. Releasing the pull ring requires a clockwise twist before pulling the pin. The pull ring can easily be reinserted to the safe position if the pin has not been removed.
Output
175 db @ 5 Feet, 6-8 million candela, 8.5 milliseconds 50% of energy through top 10 ports at 15° from vertical, 50% of energy through 10 base ports at 15° from vertical
Physical
Model ....................... 7290M
Overall Height ........... 6"
Total Weight ............. 420 gm (14.8oz)
Flash Ports ............... 10 top & 10 base
Min Qty 24
|
|
|
7200M Mini Flash-Bang Training System - $43.00 - Contact us to purchase
The new Model 7200M Mini Training System provides an excellent training device. It is built and weighs exactly the same as our Model 7290M Mini Flash-Bang, but has no flash charge. The 7290MT body is painted with a bright blue coating, and it can be used an unlimited number of times. The M201FB fuze for this system has 10 times the output of a normal M201 fuze and it is threaded with a left hand thread so it can not be accidentally used in any other munitions. The Model 7200M produces an output of about 120db. The base contains a standard 3/8-16 UNC thread at its center allowing attachment of numerous accessories, including: Clamp, Stake, Eye Bolt or Magnet.
View more information
Danger
• For use only by qualified personnel trained in the use of these products.
Safety
Our 7200M Flash-Bang products come standard with our pull ring safety clip, which retains the pull ring against the fuze body. Releasing the pull ring requires a clockwise twist before pulling the pin. The pull ring can easily be reinserted to the safe position if the pin has not been removed.
Output
120 db @ 5 Feet
Physical
Model ....................... 7290MT
Overall Height ........... 6"
Total Weight ............. 420 gm (14.8oz)
Flash Ports ............... 10 top & 10 base
|
|
|
| |